Extruding

MD

DP404 CAN OPEN digital output

MD DP404 CAN OPEN digital output

 

 

 

Overview  

The MD series of Gefran, are pressure transmitters for using in High temperature environment and specifically designed for melt pressure measurement and available only to be used in large-scale fixed installations or in large-scale stationary industrial tools, typically extruders, or for laboratory B2B equipments for R&D purposes according to the European Directive 2011/65/EU

 

Description

  • Digital output signal with DP404 CAN OPEN communication protocol
  • Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud)
  • Software / Hardware selection of Baud rate and ID nodes
  • Operation with 1 or 2 settable alarm limits
  • "Autozero" for temperature compensation
  • Zero and span drift compensation
  • 80% FSO calibration signal
  • Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Extensimetric measurement principle with Wheatstone jumper
  • Precision: < ± 0.25% FSO (H); < ±0.5% FSO (M)
  • Hydraulic transmission system to guarantee temperature stability.
  • Protection level: IP65
  • Standard threading: 1/2-20 UNF, M18x1.5; other versions on request
  • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100 bar-1500 psi

 

Downloads

Brochure
Datasheet
User Manual

 

HMX
Smart HART Atex - Performance Level PL 'c'

 

MD
DP404 CAN OPEN digital output

 

Thank you