Slide Products
Slide
DRI-AIR Industries of the United States offer a complete range of very high quality desiccant material dryers. DRI-AIR offer the following possibilities:
No ozone depleting chemicals
Non-sillicone, non-wax formulation
Neutralizes fingerprint acids
No-Rust is a one-step rust preventive that contains both neutralizer and rust preventive. It provides positive protection by displacing moisture from metal surfaces and adhering tightly to the surface. Ideal for mold and die protection, it works on stamping dies, stripper plates, jigs and fixtures, rubber mold dies, die casting dies, precision instruments, machine tools and machined or ground steel of all kinds. Accurate spray pattern concentrates protection in normally inaccessible crevices. *Protects up to five years under normal indoor storage conditions.
Net Wt. 12 oz.
For more information visit Slide Product
2-year protection*
No chlorinated solvents
No ozone depleting chemicals
Non-penetrating
Will not bleed out and mark parts
Neutralizes fingerprints
Non-silicone , non-wax formulation
Self-cleaning in start-up
Slide Quick RP employs a combination of fast evaporating solvents and oils to set up quickly on your mold surfaces, providing immediate protection against moisture and light acids. This unique "dry" package makes clean-up quick and easy when the mold is put back into production, saving time and money.
Net Wt. 10 oz.
For more information visit Slide Product
2-year protection*
No ozone depleting chemicals
Non-penetrating
Will not bleed out and mark parts
Neutralizes fingerprints
Non-silicone , non-wax formulation
Self-cleaning in start-up
Seals out condensation
Also available with red tinted formula
Mold Shield has a unique, extra-dry spray package, which delivers a dry mist spray which will not penetrate into moving mold parts, including ejector pin holes, slides, cams, etc. Conventional rust preventives may leach out of mold crevices and mark parts, resulting in lost production time and rejected parts. This special dry mist feature prevents marking of plastic parts when molds are put back in service. *Protects up to two years under normal indoor storage conditions.
Net Wt. 14 oz.
For more information visit Slide Product
FDA Approved Lubricant
Approved for food machinery(++)
Non-staining
Odorless
EconoMist contains the same high-quality ingredients as premium Silicone Release except formulated to be used for light-duty applications. For tougher molds use the heavy-duty formulation found in Silicone Release (No. 40112N).
Maximum operating temperature: 600°F
Net Wt. 12 oz.
For more information visit Slide Product
An excellent all-purpose release
Neutral white-oil-based release+++++
No lecithins
Won’t turn color or turn rancid
Food-approved oil
Use Pure Eze with all thermoplastic resins, polyolefins, polycarbonates, rubber and some epoxies. It is a white oil-based release that is ideal for medical and food applications. Because it is formulated with a highly refined mineral oil, it is colorless, odorless, tasteless and will not change color over time.
Maximum operating temperature: 600°F
Net Wt. 11.5 oz.
For more information visit Slide Product
No methylene chloride
No chlorofluorocarbons (CFC’s)
No 1,1,1 Trichloroethane
Meets all current EPA and OSHA Regulations
Mold Cleaner Plus Degreaser III cleans without wiping and leaves no residue. It is a fast, convenient method for removing silicones, grease, oil and wax build-up on mold surfaces, etc. Mold Cleaner Plus Degreaser III’s fast-evaporating formulation is ideal for cleaning cold molds. It is non-flammable, non-conductive and non-abrasive.
Net Wt. 20 oz.
For more information visit Slide Product
Food Approved (GRAS)**
No ozone depleting chemicals
A multi-purpose cleaner with no chlorinated solvents
Will not stain aluminum
No caustic or acidic compounds
Use on ordinary soil stains and most painted surfaces
On/Cycle is the ideal mold cleaner for use while in production. It works on warm molds up to 150°F and easily removes releases, oils, greases and many resinous build-ups before they can become a problem. Made from citrus oils, it destroys odors leaving a pleasant orange scent.
Net Wt. 12 oz.
For more information visit Slide Product
Quickly removes releases, grease, oil and more
Replaces hazardous cleaning solvents
including 1,1,1 trichlorethane
Fast, convenient, pre-saturated sheets quickly clean almost any surface.* Use for preparing molds for production or storage; touch-up cleaning during production; surface prep prior to secondary operations; and general maintenance and all-purpose cleaning. *Pre-test on non-metal surfaces.
No. 46370 Canister of 70 wipes
For more information visit Slide Product
Methylene chloride
Food Approved (GRAS)****
Leaves no oily residue
No global warming compounds
Not a hazardous air pollutant (not HAP)
Non-corrosive and not SARA reportable
Biodegradable and rinses with water
Meets tough health, safety, environmental regulations***
High solvency for resins, polymers and dies
NEXGEN is the most extraordinary cleaning product available. Formulated purely from citrus & vegetable products, it is so much more than other “natural” cleaners. Use for: General cleaning and wiping ● Oil spill clean-up and remediation ● Dewaxing ● Paint line flush and clean-up ● Ink, tar and adhesive removal ● Paint and Graffiti removal ● Removing silicone and lithium grease ● Degreasing
Net Wt. 10 oz.
For more information visit Slide Product
No ozone depleting chemicals
FDA approved, USDA rated (aerosol only)
NSF-H1 (non-aerosol formulations)
Colorless & odorless, excellent dielectric
Contains PTFE , No silicones
Compatible with other lubricants
Will not bleed out; paintable
Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixo-tropic properties provide excellent mechanical stability when sudden temperature changes occur. A clear, clean, non-yellowing grease, Super Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also repels water and prevents corrosion.
No. 43900T 14 oz. tube for grease guns
For more information visit Slide Product
No ozone depleting chemicals
For drilling, cutting, sawing, tapping
Cutting Oil is a general purpose oil formulated to provide faster, easier drilling, cutting, sawing, threading, tapping and general machining. Compounded oil clings to metal and follows tool down. Pressurized spray forces cutting oil into hard-to lubricate areas.
Net Wt. 16 oz.
For more information visit Slide ProductTo view the Slide Products website, click here For more information, e-mail us
